gear icon

Entering Your Combination in the Teaching Station in the Technology Classroom

Operating System: All

Applies To: UB instructors

Last Updated: February 13, 2018

Crestron touch panel teaching station

1. Locate the Crestron touch panel on the top of the Teaching Station cabinet. 

2. Tap Press Here To Start.

combination or password

3. Enter or dial the 6-digit Combination. The number should be entered without dashes and include any zero.

For dial combination locks: Complete two right turns. Stop at the first digit. Turn left one whole turn, past the first digit. Stop at the second digit. Turn right until the dial stops (do not let go of the dial).

Common Questions

How do I find my Teaching Station combination?

Why is the Crestron touch panel not on or black?

The Crestron touch panel uses an energy saving switch.  Touch the screen to reveal Press Here To Start.

Why is the computer's monitor black or not working?

The monitor power may be turned off. Press the small button on the lower right side of the monitor.

Contact the UBIT Help Center

Have a UBITName? You may also use the UBIT Help Center Online (login required).

(Required)
 
(Required)
(xxx) xxx-xxxx
(Required)
Use your @buffalo.edu email ONLY if you have access to it
 
(Required)