Published June 29, 2017
A UB faculty member has devised an ingenious way to more quickly test soil in farm fields to make detailed maps of differing soil types. Those maps then can be used to design more efficient farming practices.
Erasmus Oware, assistant professor in the Department of Geology, College of Arts and Sciences (CAS), has designed a system to quickly measure the electrical conductivity of every square yard of a field to determine the boundaries of different types of soil. Then, a few traditional boring-and-testing techniques can ascertain the soil makeup of a broad area. The project is in collaboration with Darcy Telenko of the Cornell Cooperative Extension.
The method greatly reduces the time it takes to make a soil map — conventional techniques take a day to map one acre, but that time is reduced to 20 minutes with the new method — and produces a much more detailed map.
“It’s faster, and you get a higher-resolution soil map,” Oware explains. “We are collecting a lot of data points, many more than with traditional soil sampling.”
The method won an $84,840 grant from the New York Farm Viability Institute, which has been augmented with support from CAS. The money was used to purchase the equipment and will help pay for students to do fieldwork on the project this summer.
Oware’s system involves dragging an electronic wave emitter behind an ATV that traverses every yard of a field. A receiver in the vehicle records the conductivity of the soil and its precise location. The result is a detailed map of the different soil types, generated with thousands of data points.
Traditional field tests are then performed to determine the water-holding capacity of the different soil types. Knowing how the soil holds water is crucial in determining how much irrigation and fertilizer are required.
“We will tell the farmer, ‘This part of the field holds water for a longer time, so you can irrigate it less frequently. The other area does not hold water, so it needs to be watered less, but more frequently,’” Oware says.
Too much watering can cause several problems.
“If you over-irrigate a farm, the water will either create runoff and wash the fertilizer into nearby surface water bodies, or it will induce drainage whereby the fertilizer drains beyond the root zone and will contaminate groundwater resources,” he says. “On the other hand, under-irrigation will create water stress of the plant, affecting plant quality and yield.”
Thus, getting a precise handle on irrigation saves water, reduces the amount of fertilizer used and saves energy, he says.
“We are trying to design a sustainable and environmentally friendly way of farming.”
The device measures soil conductivity at 20 and 40 centimeters deep, the heart of the vegetable “root zone.”
Oware says farmers are eager to participate in his study. One farm in Niagara County and two farms in Erie County have been studied, and 12 more are going to be added.
He says farmers know from experience which areas of their fields produce differently, but the detailed maps give them much more accuracy and detail as to why.
Once the water needs of a farm field are mapped, the next step is to modify the irrigation system so that different areas of the field can be watered at different rates. Oware says he is working on developing a valve system for that purpose.
Because Oware’s mapping method is so rapid, it can be used on large, industrial-sized farms, he says. He recently mapped a seven-acre field in three hours, generating more than 50,000 data points.