Reaching Others University at Buffalo - The State University of New York
Skip to Content

Registering Your Computer or Router

You must register your personal computer, router, gaming or media device before connecting to ResNet.

Registering Your Computer or Router

Do you need a router?


A router is only needed if you’re trying to connect more than one device (computers or gaming devices) to ResNet at a time. Before using your router, it must be secured to prevent other residents from using the device. See your router manufacturer's guide to determine how to set a password on your router.

To register your computer or router:

1.    Connect your computer or router to the Ethernet port on the wall using a Cat 5 Ethernet cable.

  • If you’re installing a router/gateway, next connect your computer to the router (and no other devices at this time).
  • The individual devices connected to the router do not need to be registered to obtain network access.

2.    Open a web browser; you should automatically be directed to the ResNet Network page. If not, direct your browser to http://128.205.250.6/registration.

3.    Agree to the terms and conditions of use.

4.    Select Register Your Computer or a Router.

5.    Enter your UBITName and password. Click Continue.

6.    Wait while the network connection is established.  You should receive a notification message when this is complete.

7.    Click OK. Restart your computer.

Did This Page Answer Your Question?

(Required)
 
Email, UBITName or phone number
(Required)
Enter the letters or numbers you see below in the space provided. Click "Get a new challenge" if they are not readable.