Reaching Others University at Buffalo - The State University of New York
Skip to Content

Connecting Your Kindle Fire to Wi-Fi

Connect your Kindle Fire to UB's Wi-Fi when you are on campus.

Note:

You must be on campus and in range of a Wi-Fi signal to connect your Kindle Fire to UB's Wi-Fi.

Configuring Your Kindle Fire

  1. Pull down the menu bar by tapping the settings gear icon.
  2. Tap the Wi-Fi icon.
  3. If Wireless Networking or Wi-Fi are OFF, tap ON.
  4. Select UB_Secure from the list of Wi-Fi connections.
  5. Select PEAP as the EAP method
  6. Select MSCHAPV2 as Phase 2 authentication.
  7. Leave both CA certificate and User certificate blank.
  8. Enter your UBITName in the Identity field.
  9. Leave Anonymous Identity blank.
  10. Enter your UBIT Password in the Password field.
  11. Tap Connect to establish a connection. If you do not see a Connect button, tap the keyboard button and then tap  Connect.
  12. You should see Connected next to the UB_Secure Wi-Fi connection.

Did This Page Answer Your Question?

(Required)
 
Email, UBITName or phone number
(Required)
Enter both words below, separated by a space. If either word appears unclear, click 'Get a new challenge' to receive two new words.